HP Laserjet 2100 Printer Troubleshooting

HP Laserjet 2100 Printer Troubleshooting – When using the HP Laserjet 2100, errors or other performance-influencing conditions may occur that require you to fix the situation. Troubleshooting the conditions, instead of taking the printer directly to a repair shop, you can save yourself anytime lost work while the printer is repaired as well as the cost of the repair bill. HP recommends that you take specific steps to resolve specific issues with the Laserjet 2100. Paper jam or “Memory Out” error.

Steps HP Laserjet 2100 Printer Troubleshooting

1. Open the top cover of the printer and remove the ink cartridge. Cover the ink cartridge with a clean sheet to protect it from damage caused by light.

2. See bounded sheets of paper, pull them towards the back of the printer to pull out.

3. Open both paper trays and pull out all pieces of paper. Adjust the paper guides so they are flush with the edges of the paper inside and close the trays.

4. Open the printer’s tailgate and pull out any jammed paper. Install the ink cartridge and close the printer’s rear and top doors. HP Laserjet 2100 Printer Troubleshooting.

5. Turn off the printer, then turn it on again immediately. Wait for the warm-up process to complete, then open the printer above and back doors, take out the ink cartridge and remove any small pieces of paper present.

6. Click the “Start” button and select “Printers and Faxes.” Right-click on the printer icon and select “Properties” from the menu.

7. Choose Exit, and then click the radio button next to Print faster under Print Quality.

8. The last step of HP Laserjet 2100 Printer Troubleshooting is to click Details under Print Quality. Select “600 DPI” under “Output Settings.” Click “OK” to save the settings.

Have a happy print 🙂